What functionalities are required for an accelerometer?


Release time:

2024-11-12

Sensor Activity: This is one of the important functions of the sensor. A factory-tested standard value is usually given after purchasing the sensor. For example: 50.1mV/g. Before use, send it to the relevant department for calibration and use it according to the practical calibration value.

 Accelerometers are widely used and are one of our company's products. Below, we will introduce its functions.

1. Sensor Sensitivity: This is one of the important functions of the sensor. A factory-tested standard value is usually given after purchasing the sensor. For example: 50.1mV/g. Before use, it should be calibrated by the relevant department and used according to the practical calibration value, especially when used in the low-frequency band (5-20Hz).

2. Measurement Range: Choose a sensor whose measurement range is as consistent as possible with the input range of the data acquisition card. For example: The maximum measurement range of this device is 100g, and the input range of the data acquisition card is ±5V. Then, selecting a sensitivity of 50mV/g can ensure a maximum measurement of 100g (5000mV/50mV/g=100g).

  IEPE Accelerometer

3. Frequency Range: The frequency range (5% loss) at which the sensor operates. This shows that the frequency response of the sensor is not flat.

4. Resonance Frequency: Each sensor has its own resonance frequency, which should be far away from the operating frequency. Here it is given as: 35KHz (away from the high operating frequency of 10KHz).

5. Transverse Sensitivity: Transverse sensitivity refers to the ratio of the output to the input oscillation when an accelerometer is subjected to an oscillation perpendicular to the sensitive axis. The ratio of transverse sensitivity to axial sensitivity is called the "transverse sensitivity ratio", which represents the quality of the piezoelectric accelerometer.

Copyright © Beijing Weishi Technology Co., Ltd

Business License

Powered by: 300.cn | Tag | Privacy Policy