What is a vibration acceleration sensor?


Release time:

2024-11-12

Vibration displacement sensors measure displacement (gap change), vibration acceleration sensors measure acceleration, and vibration velocity sensors measure velocity. Velocity can be integrated once to obtain displacement, and acceleration can be integrated once or twice to obtain velocity and displacement, respectively. However, integration usually introduces errors.

Vibration sensors are classified into displacement, acceleration, and velocity sensors according to the directly measured physical quantity.

As the name suggests, a vibration displacement sensor (commonly an eddy current sensor) measures displacement (gap change), a vibration acceleration sensor measures acceleration, and a vibration velocity sensor measures velocity. Velocity can be integrated once to obtain displacement, and acceleration can be integrated once or twice to obtain velocity and displacement, respectively; however, integration usually introduces errors.

The measurement and selection of the sensor's location are related to the vibration frequency.

Generally, in the low-frequency range, vibration intensity is proportional to displacement; in the mid-frequency range, vibration intensity is proportional to velocity; and in the high-frequency range, vibration intensity is proportional to acceleration. Large rotating machinery usually uses non-contact eddy current displacement sensors mounted on bearings to measure the relative vibration of the rotor shaft journal, and uses magnetic-electric velocity sensors or piezoelectric acceleration sensors mounted on the machine housing to measure vibration. The vibration of gears and rolling bearings is measured using acceleration sensors.

Vibration velocity reflects the magnitude of energy, vibration displacement specifically reflects the magnitude of the gap, and vibration acceleration reflects the magnitude of the impact force. Because vibration energy can more accurately reflect the strength of vibration, current vibration standards tend to use vibration severity (velocity RMS value) to judge the vibration state of equipment.

Copyright © Beijing Weishi Technology Co., Ltd

Business License

Powered by: 300.cn | Tag | Privacy Policy